|
|
|
PA6 Technical Data
|
Description：
DL300095 is made of PA6 which is a kind of plastic sheet , this plastic sheet is made of a kind of strong water imbibition translucent or opaque milk white crystal polymer trough extrusion processing. It also can be black, green or gray color if required. The advantages of this kind of material are that it has good elasticity, excellent flatness performance, excellent mechanics, high strength, good toughness and good wear resistance, as well as self-lubrication and solvent resistance. But when the surrounding environment is higher than 80℃, it is easy to burn, and if under damp environment, long-term high load use will decrease PA6’s impact strength.
Physical characteristics：
DL300095 PA6 material with low melting point, process a wide temperature range. Its impact
resistance is good, but water absorption is strong.
Thickness: 0.6,0.8,0.95,0.1,0.15mm
Tolerance：±0.03mm |
Density: 1.13-1.15(g/cm3) |
Melting point：215-225℃ |
| Pyrolytic temperature：>300℃ |
Elongation：> 30% |
Bending strength： 90.0Mpa |
| Equilibrium water absorption rate：3．5% |
Strength stretchable：> 60．0Mpa |
Notched impact strength:(KJ/m2) > 5 |
Property：
Performance items |
Test method |
Test conditions |
Unit |
Test Data |
Basic property |
Water absorbency |
ASTM D-570 |
23℃，24H |
% |
1.8 |
Physical property |
Proportion |
ASTM D-792 |
- |
- |
1.13-1.14 |
Mechanical property |
Izod notched impact strength |
- |
Unnotched1/2 ,
23℃ |
Kg.cm/cm |
5 |
Izod notched impact strength |
- |
Unnotched1/8,
23℃ |
Kg.cm/cm |
NO rupture |
Izod notched impact strength |
- |
Unnotched 2/1，-40℃ |
Kg.cm/cm |
3.5 |
| Rockwell Hardness |
ASTM D-785 |
23℃ |
- |
119 |
Tensile yield strength |
ASTM D-638 |
-40℃ |
Kg/cm² |
1230 |
Tensile yield strength |
ASTM D-638 |
23℃ |
Kg/cm² |
420 |
Tensile yield strength |
ASTM D-638 |
80℃ |
Kg/cm² |
320 |
Cross-breaking strength |
ASTM D-790 |
-40℃ |
Kg/cm² |
1500 |
Cross-breaking strength |
ASTM D-790 |
23℃ |
Kg/cm² |
1100 |
Cross-breaking strength |
ASTM D-790 |
80℃ |
Kg/cm² |
500 |
Tensile fracture degree |
ASTM D-638 |
23℃ |
Kg/cm² |
20 |
Breaking elongation |
ASTM D-638 |
23℃ |
% |
180 |
Thermal property |
Heat deflection temperature |
ASTM D-696 |
- |
℃ |
190 |
Melting point |
Differential scanning calorimeter method DSC |
- |
℃ |
225 |
Specific heat |
- |
- |
Cal/g.℃ |
0.46 |
Thermal conductivity |
- |
- |
Kcal/m.hr.℃ |
0.18 |
Notes：The results only for the sampling test results, for reference only.
Application and advantage：
Due to the many natures of the material D30095 PA6, it has been widely used in daily life, industrial, automotive and other fields, advantages as follows:
1. The Products can resisitance to the high temperature, long-term use, keep the good property after thermal ageing.
2. Combine with Superior strength and durability, good rigidity and heat resistance.
3. Optimize the design，perfect appearance can apply to complicated structures and help designers to develope new productions with new structure.
4. High thermal stability，don't hang in wave soldering tin in 270 degrees.
5. The surface effect is good，no floating fiber.
6. Excellent dimensional stability, prevent warping.
WARRANTY:
The products are sold with the understanding that the buyer with test them in actual use and
determine for him/herself their adaptability to his/her intended uses. DL Packing warrants to
the buyer that its products are free from defects in material and workmanship,but limits its obligation under this warranty to replacement of the products shown to DL Packing' satisfaction to have been defective,provided that the Purchaser has complied with the handling,Storage and shelf life requirements as specified by DL Packing in applicable materials specifications. The Purchaser Shall return the products using DL Packing's return policy as stated above.The above warranties extend solely to Purchaser and all warranty claims must be made by Purchaser.Rework or Replacement shall neither extend nor decrease the original warranty period.The term of all warranty periods shall not exceed thirty(30) days from the date of the original shipment.
|
|
